Cart
Low interest financing available
  • Image of Bryant® Evolution® - 2 Ton 18 SEER Residential Variable Speed Heat Pump Condensing Unit
  • Image of 2.5 Ton Evaporator N Coil Cased Vertical Upflow / Downflow Painted 17" Width (Aluminum)
  • Image of Bryant® Evolution® 97% AFUE 80000 Btuh 4-Way Multipoise ECM Condensing Gas Furnace Variable Speed

Bryant Evolution 2-Ton 18-SEER 17-in. Dual-Fuel Heat Pump & 80k BTU 97% Gas Furnace

$13,510.93
E-507-102-288B
Choose Installation Package
Currently out of stock
Currently out of stock
Currently out of stock
 

Bryant Evolution 2-Ton 18-SEER 17-in. Dual-Fuel Heat Pump & 80k BTU 97% Gas Furnace

$13,510.93
+ Add To Cart

Includes a 10-Year Equipment Warranty and a Two-Year Labor Warranty

Our simple, single price includes the cost of the heating and cooling system, installation, parts, labor and tax!

Bryant® Evolution® - 2 Ton 18 SEER Residential Variable Speed Heat Pump Condensing Unit

The Bryant® Evolution® V heat pump offers high-efficiency variable speed performance in a remarkably small cabinet and provides up to 11 HSPF heating efficiency and up to 18 SEER cooling efficiency. The variable speed inverter capacity control delivers up to 5 stages of operation for exceptional load matching, dehumidification and zoning performance.
This product has been designed and manufactured to provide flexible system matching and work with a wide variety of indoor units and controls.


NOTE: Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.


STANDARD FEATURES


Energy Efficiency
Up to 19 SEER /13 EER / 11 HSPF
Microtube Technology™ refrigeration system
Sound
Sound level as low as 55 dBA in low speed (Silencer System II).
Soft start and smooth ramp to operating speeds
Comfort
Variable speed compressor operates at 5 stages with capacity range from as wide as 25-100%
Air cooled Inverter variable speed drive
System requires Evolution® Connex™ Control with version 11 software or newer for 5-stage operation.
Ratings provided with 2-stage thermostats and suitable non-communicating indoor products for 2-stage operation.
Reliability
Puron® refrigerant -- environmentally sound, won't deplete the ozone layer and low lifetime service cost.
Front-seating service valves
Inverter control drives compressor and fan motor
No control module attached to fan motor
Evolution intelligence monitors critical system parameters
Pressure equalizer valve for easy compressor starting
High pressure switch
Suction pressure transducer
Electronic expansion valve (EXV) for heating, TXV for cooling
Compressor discharge temperature sensor
Suction temperature sensor
Filter drier (field installed)
Internal crankcase heater standard
Flexibility and installation:
2 control wires to outdoor unit in complete Evolution® system and Connex™ Control
Smaller and lighter than 2-stage units
Minimum and Maximum adjustments with Evolution® Connex™ Control
Hybrid Heat™ dual fuel capable
Compatible with non-communicating thermostats
Durability
DuraGuard™ protection package:
Solid, Durable sheet metal construction
Steel louver coil guard
Baked-on, complete outer coverage, powder paint


Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

2.5 Ton Evaporator N Coil Cased Vertical Upflow / Downflow Painted 17" Width (Aluminum)

This vertical design N-coil is a furnace coil designed to provide the highest standards of reliability and durability. The coils are available for use in Puron®, R-410A refrigerant and R-22 systems. Both designs have a painted case and come with factory-installed thermostatic expansion valves (TXV). The coils are offered in different width configurations for use in multiple installation applications. Additionally, they are offered in a transition configuration, a design which simplifies making field-supplied transition duct configurations. Easy maintenance is provided as the coil slides out of the cabinet after removing the access door and service panel. The coils are available in sizes 018 through 061 (1-1/2 to 5 tons).
Transition coil models CNPVT are designed for use with one size smaller width furnaces without field modifications.
Aluminum Coils - "L" models are built with aluminum hairpins, designed to resist both general pitting corrosion and excessive indoor Formicary Corrosion. (Formicary Corrosion is an industry phenomenon.)


STANDARD FEATURES
Water Management - These coil designs do an excellent job of water management. The coils are designed to avoid water blow-off into the ducts by directing condensate away from the fins and into the drain pan.
Durable Condensate Pan - Each coil is equipped with a corrosion-resistant condensate drain pan. The condensate drain pan is designed with a slope to help ensure proper drainage, improved moisture removal, and home comfort.
Compact Design - Unique design offers as much as 2 to 4 in. (51 to 102 mm) less in height to aid in tight installations.
Brass Inserts - Every condensate pan features two 3/4 in. female threaded brass insert connections. The unique brass inserts provide for a leak-free condensate line connection to prevent water damage.
Refrigerant Connections - The coils are provided with proven sweat-connections for leak-free operation maintaining system reliability.
Burst Pressures - These coils meet or exceed burst pressure of 2100 psi which is at least three to five times the pressure they will see in actual application.
Thermostatic Expansion Valves (TXV) - All Carrier coils have refrigerant-specific factory-installed TXVs.
Teflon Ring - The ring, installed inside the liquid line connection at the TXV, is the best option for preventing refrigerant leaks and future service calls. Teflon works with both Puron, R-410A, the environmentally friendly refrigerant and R-22 refrigerants.
Protective Tube Sheets - Protect the durable copper tubing from being damaged during the manufacturing and installation process.

Bryant® Evolution® 97% AFUE 80000 Btuh 4-Way Multipoise ECM Condensing Gas Furnace Variable Speed

The 987MB Multipoise Variable-Speed Condensing Gas Furnace features the modulating Evolution® System. The Perfect Heat® Technology modulating gas system is at the heart of the comfort provided by this furnace, along with the full-featured variable-speed, constant airflow, communicating blower motor, and variable-speed inducer motor. With an Annual Fuel Utilization Efficiency (AFUE) of up to 98.3%, the Evolution modulating gas furnace provides exceptional savings as well. This Evolution Gas Furnace also features 4-way multipoise installation flexibility, and is available in six model sizes. The 987MB can be vented for direct vent/two-pipe, ventilated combustion air. A Bryant Evolution® Control and Evolution® Air Conditioner or Heat Pump, can be used to form a complete Evolution System. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified
in Canada. This furnace is not designed for use in recreation vehicles, manufactured (mobile) homes or outdoors.

STANDARD FEATURES
Our quietest furnace. Compare for yourself at HVACpartners.com.
Compatible with single and multi-zone Evolution® systems.
Evolution Features-match with the Evolution® Control for Evolution® System benefits.
All sizes meet ENERGY STAR® Version 4.0 criteria for gas furnaces: 95%+AFUE
Ideal height 35" (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
Silicon Nitride Igniter PerfectLight™ Hot Surface Igniter.
SmartEvap™ technology helps control humidity levels in the home when used with a compatible humidity control system.
Fan On Plust technology allows control of continuous fan speed from a compatible thermostat.
External Media Filter Cabinet included.
4-way multipoise design for upflow, downflow or horizontal installations, with unique vent elbow and optional through-the-cabinet downflow venting capability.
Variable-Speed blower and inducer motors, modulating gas valve.
Self-diagnostics and extended diagnostic data through the Advanced Product Monitor (APM) accessory or Evolution® User Interface.
Adjustable blower speed for cooling, continuous fan, and dehumidification.
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
Propane convertible (See Accessory list).
Factory-configured ready for upflow applications.
Fully-insulated casing including blower section.
Convenient Air Purifier and Humidifier connections.
Direct-vent/sealed combustion or ventilated combustion air venting.
Installation flexibility: sidewall or vertical vent.
Residential installations may be eligible for consumer financing through the Retail Credit Program.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Everything included in one price, including the sales tax!

You are seeing our “all-in” prices online, which include the cost of the heating and cooling system, installation parts, labor costs and sales tax. In most circumstances, this installation package covers everything to replace your existing system. Some projects, however, may require work outside of a typical installation, and therefore may incur additional charges. Prior to starting your project, your adviser will discuss any additional required work, if applicable, and why it’s needed. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Your installation is guaranteed to pass inspection or we will fix it for free.

As a part of our professional installation of HVAC systems, we will perform the following:

  • APPLICATION FOR STATE & LOCAL PERMITS: Permit fees are not included, as they vary by municipality.
  • REMOVAL AND DISPOSAL OF YOUR EXISTING SYSTEM: We recycle your old equipment.
  • INSTALLATION OF NEW CONDENSATE DRAIN: Includes up to 10 feet of gravity drain.
  • FABRICATION OF NEW SHEET METAL SUPPLY TRANSITION: Includes up to 12 in. to connect the new system to existing ductwork.
  • OUTDOOR UNIT REPLACEMENT PACKAGE: Includes new outdoor pad, snow legs, weatherproof electrical disconnect and waterproof electrical line whip.
  • NITROGEN LEAK TEST: We will pressure test the existing refrigerant lines. If leak is found a quote to repair or replace will be given.
  • PROFESSIONAL VACUUM TEST: Our installers carry micron gauges and will pull a vacuum below 500 microns on every job.
  • 10 YEAR COMPRESSOR, 10 YEAR PARTS & ONE-YEAR LABOR WARRANTY: Equipment must be registered within 30 days of installation to receive warranty.

Possible additional charges:

Our standard installation package includes everything required for most installations. Should your project require work outside of a standard installation, your adviser will discuss anything that may result in additional charges. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Examples of equipment or labor that could result in additional charges include:

  • Condensate Removal Pump
  • Attic Charges
  • Crane Charges
  • Flue Piping Longer Than 6 ft.
  • Custom Sheet Metal Work
  • Combustion Air Registers
  • Working in finished basements with finished ceilings
  • Converting from standard efficiency to high efficiency

We're trying hard to keep it simple!

Our goal is one price, one trip, one day.

We believe no one should have to come to your home to quote prices for a HVAC systems, parts and standard installation. Sure, we’ll come to your house to take measurements and ensure that we've sized the right system, but we hold the cost of our systems and installations to the prices we show online.

Next Steps

  1. Call us to select your system and to schedule a no-obligation home measurement so that we verify that we’ve sized the right system and to take required measurements.
  2. If gas permits are required by your municipality, we'll collect the nominal fee and process the permits before we begin.
  3. Please ask us about financing if that can help.

We hope we've made this easy. We believe that one simple price — known up front — let's everyone focus on getting this done right.

Warranty

We stand behind the work we perform and the quality of the HVAC systems we install. We guarantee your new HVAC equipment or system will pass inspection or we’ll make the needed adjustments so that it does. Additionally, we provide a 10 Year Parts & Two-Year Labor Warranty on all new heating and cooling systems we install.

Bryant® Evolution® - 2 Ton 18 SEER Residential Variable Speed Heat Pump Condensing Unit

The Bryant® Evolution® V heat pump offers high-efficiency variable speed performance in a remarkably small cabinet and provides up to 11 HSPF heating efficiency and up to 18 SEER cooling efficiency. The variable speed inverter capacity control delivers up to 5 stages of operation for exceptional load matching, dehumidification and zoning performance.
This product has been designed and manufactured to provide flexible system matching and work with a wide variety of indoor units and controls.


NOTE: Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.


STANDARD FEATURES


Energy Efficiency
Up to 19 SEER /13 EER / 11 HSPF
Microtube Technology™ refrigeration system
Sound
Sound level as low as 55 dBA in low speed (Silencer System II).
Soft start and smooth ramp to operating speeds
Comfort
Variable speed compressor operates at 5 stages with capacity range from as wide as 25-100%
Air cooled Inverter variable speed drive
System requires Evolution® Connex™ Control with version 11 software or newer for 5-stage operation.
Ratings provided with 2-stage thermostats and suitable non-communicating indoor products for 2-stage operation.
Reliability
Puron® refrigerant -- environmentally sound, won't deplete the ozone layer and low lifetime service cost.
Front-seating service valves
Inverter control drives compressor and fan motor
No control module attached to fan motor
Evolution intelligence monitors critical system parameters
Pressure equalizer valve for easy compressor starting
High pressure switch
Suction pressure transducer
Electronic expansion valve (EXV) for heating, TXV for cooling
Compressor discharge temperature sensor
Suction temperature sensor
Filter drier (field installed)
Internal crankcase heater standard
Flexibility and installation:
2 control wires to outdoor unit in complete Evolution® system and Connex™ Control
Smaller and lighter than 2-stage units
Minimum and Maximum adjustments with Evolution® Connex™ Control
Hybrid Heat™ dual fuel capable
Compatible with non-communicating thermostats
Durability
DuraGuard™ protection package:
Solid, Durable sheet metal construction
Steel louver coil guard
Baked-on, complete outer coverage, powder paint


Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

2.5 Ton Evaporator N Coil Cased Vertical Upflow / Downflow Painted 17" Width (Aluminum)

This vertical design N-coil is a furnace coil designed to provide the highest standards of reliability and durability. The coils are available for use in Puron®, R-410A refrigerant and R-22 systems. Both designs have a painted case and come with factory-installed thermostatic expansion valves (TXV). The coils are offered in different width configurations for use in multiple installation applications. Additionally, they are offered in a transition configuration, a design which simplifies making field-supplied transition duct configurations. Easy maintenance is provided as the coil slides out of the cabinet after removing the access door and service panel. The coils are available in sizes 018 through 061 (1-1/2 to 5 tons).
Transition coil models CNPVT are designed for use with one size smaller width furnaces without field modifications.
Aluminum Coils - "L" models are built with aluminum hairpins, designed to resist both general pitting corrosion and excessive indoor Formicary Corrosion. (Formicary Corrosion is an industry phenomenon.)


STANDARD FEATURES
Water Management - These coil designs do an excellent job of water management. The coils are designed to avoid water blow-off into the ducts by directing condensate away from the fins and into the drain pan.
Durable Condensate Pan - Each coil is equipped with a corrosion-resistant condensate drain pan. The condensate drain pan is designed with a slope to help ensure proper drainage, improved moisture removal, and home comfort.
Compact Design - Unique design offers as much as 2 to 4 in. (51 to 102 mm) less in height to aid in tight installations.
Brass Inserts - Every condensate pan features two 3/4 in. female threaded brass insert connections. The unique brass inserts provide for a leak-free condensate line connection to prevent water damage.
Refrigerant Connections - The coils are provided with proven sweat-connections for leak-free operation maintaining system reliability.
Burst Pressures - These coils meet or exceed burst pressure of 2100 psi which is at least three to five times the pressure they will see in actual application.
Thermostatic Expansion Valves (TXV) - All Carrier coils have refrigerant-specific factory-installed TXVs.
Teflon Ring - The ring, installed inside the liquid line connection at the TXV, is the best option for preventing refrigerant leaks and future service calls. Teflon works with both Puron, R-410A, the environmentally friendly refrigerant and R-22 refrigerants.
Protective Tube Sheets - Protect the durable copper tubing from being damaged during the manufacturing and installation process.

Bryant® Evolution® 97% AFUE 80000 Btuh 4-Way Multipoise ECM Condensing Gas Furnace Variable Speed

The 987MB Multipoise Variable-Speed Condensing Gas Furnace features the modulating Evolution® System. The Perfect Heat® Technology modulating gas system is at the heart of the comfort provided by this furnace, along with the full-featured variable-speed, constant airflow, communicating blower motor, and variable-speed inducer motor. With an Annual Fuel Utilization Efficiency (AFUE) of up to 98.3%, the Evolution modulating gas furnace provides exceptional savings as well. This Evolution Gas Furnace also features 4-way multipoise installation flexibility, and is available in six model sizes. The 987MB can be vented for direct vent/two-pipe, ventilated combustion air. A Bryant Evolution® Control and Evolution® Air Conditioner or Heat Pump, can be used to form a complete Evolution System. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified
in Canada. This furnace is not designed for use in recreation vehicles, manufactured (mobile) homes or outdoors.

STANDARD FEATURES
Our quietest furnace. Compare for yourself at HVACpartners.com.
Compatible with single and multi-zone Evolution® systems.
Evolution Features-match with the Evolution® Control for Evolution® System benefits.
All sizes meet ENERGY STAR® Version 4.0 criteria for gas furnaces: 95%+AFUE
Ideal height 35" (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
Silicon Nitride Igniter PerfectLight™ Hot Surface Igniter.
SmartEvap™ technology helps control humidity levels in the home when used with a compatible humidity control system.
Fan On Plust technology allows control of continuous fan speed from a compatible thermostat.
External Media Filter Cabinet included.
4-way multipoise design for upflow, downflow or horizontal installations, with unique vent elbow and optional through-the-cabinet downflow venting capability.
Variable-Speed blower and inducer motors, modulating gas valve.
Self-diagnostics and extended diagnostic data through the Advanced Product Monitor (APM) accessory or Evolution® User Interface.
Adjustable blower speed for cooling, continuous fan, and dehumidification.
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
Propane convertible (See Accessory list).
Factory-configured ready for upflow applications.
Fully-insulated casing including blower section.
Convenient Air Purifier and Humidifier connections.
Direct-vent/sealed combustion or ventilated combustion air venting.
Installation flexibility: sidewall or vertical vent.
Residential installations may be eligible for consumer financing through the Retail Credit Program.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Everything included in one price, including the sales tax!

You are seeing our “all-in” prices online, which include the cost of the heating and cooling system, installation parts, labor costs and sales tax. In most circumstances, this installation package covers everything to replace your existing system. Some projects, however, may require work outside of a typical installation, and therefore may incur additional charges. Prior to starting your project, your adviser will discuss any additional required work, if applicable, and why it’s needed. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Your installation is guaranteed to pass inspection or we will fix it for free.

As a part of our professional installation of HVAC systems, we will perform the following:

  • APPLICATION FOR STATE & LOCAL PERMITS: Permit fees are not included, as they vary by municipality.
  • REMOVAL AND DISPOSAL OF YOUR EXISTING SYSTEM: We recycle your old equipment.
  • INSTALLATION OF NEW CONDENSATE DRAIN: Includes up to 10 feet of gravity drain.
  • FABRICATION OF NEW SHEET METAL SUPPLY TRANSITION: Includes up to 12 in. to connect the new system to existing ductwork.
  • OUTDOOR UNIT REPLACEMENT PACKAGE: Includes new outdoor pad, snow legs, weatherproof electrical disconnect and waterproof electrical line whip.
  • NITROGEN LEAK TEST: We will pressure test the existing refrigerant lines. If leak is found a quote to repair or replace will be given.
  • PROFESSIONAL VACUUM TEST: Our installers carry micron gauges and will pull a vacuum below 500 microns on every job.
  • 10 YEAR COMPRESSOR, 10 YEAR PARTS & ONE-YEAR LABOR WARRANTY: Equipment must be registered within 30 days of installation to receive warranty.

Possible additional charges:

Our standard installation package includes everything required for most installations. Should your project require work outside of a standard installation, your adviser will discuss anything that may result in additional charges. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Examples of equipment or labor that could result in additional charges include:

  • Condensate Removal Pump
  • Attic Charges
  • Crane Charges
  • Flue Piping Longer Than 6 ft.
  • Custom Sheet Metal Work
  • Combustion Air Registers
  • Working in finished basements with finished ceilings
  • Converting from standard efficiency to high efficiency

We're trying hard to keep it simple!

Our goal is one price, one trip, one day.

We believe no one should have to come to your home to quote prices for a HVAC systems, parts and standard installation. Sure, we’ll come to your house to take measurements and ensure that we've sized the right system, but we hold the cost of our systems and installations to the prices we show online.

Next Steps

  1. Call us to select your system and to schedule a no-obligation home measurement so that we verify that we’ve sized the right system and to take required measurements.
  2. If gas permits are required by your municipality, we'll collect the nominal fee and process the permits before we begin.
  3. Please ask us about financing if that can help.

We hope we've made this easy. We believe that one simple price — known up front — let's everyone focus on getting this done right.

Warranty

We stand behind the work we perform and the quality of the HVAC systems we install. We guarantee your new HVAC equipment or system will pass inspection or we’ll make the needed adjustments so that it does. Additionally, we provide a 10 Year Parts & Two-Year Labor Warranty on all new heating and cooling systems we install.

Added to cart!
Special financing available Free shipping when you order over XX You Have Qualified for Free Shipping Spend $x to Unlock Free Shipping You Have Achieved Free Shipping Free Shipping For Over $x to Low interest financing available You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping