Cart
Low interest financing available

Bryant Legacy 24-in. Single-Stage 120k BTU 95% Gas Furnace

$4,580.15
E-787-158-915S
Choose Installation Package
Currently out of stock
Currently out of stock
Currently out of stock
 

Bryant Legacy 24-in. Single-Stage 120k BTU 95% Gas Furnace

$4,580.15
+ Add To Cart

Includes a 10-Year Equipment Warranty and a Two-Year Labor Warranty

Our simple, single price includes the cost of the heating and cooling system, installation, parts, labor and tax!

Bryant® Legacy™ 95% AFUE 120000 Btuh Single Stage 4-Way Multipoise ECM Condensing Gas Furnace

Bryant® Legacy™ 95% AFUE 120000 Btuh Single Stage 4-Way Multipoise ECM Condensing Gas Furnace


The 915SB Multipoise Condensing Gas Furnace features the single-stage Legacy™ System. The fixed-speed, constant torque (FCT) ECM blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of up to 96.2%, this furnace provides added savings over standard gas furnaces. The Legacy Gas Furnace features 4-way multipoise installation flexibility, and is available in ten model sizes. All sizes except the 26,000 BTUH model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUH model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. A Bryant Legacy Control and Legacy Air Conditioner or Heat Pump, can be used to form a complete Legacy Line System. All sizes are design certified in Canada. Specific sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.


PERFORMANCE
Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
Single-speed inducer motor, and single-stage gas valve
Silicon Nitride Power Heat™ Hot Surface Igniter.
Adjustable blower speed for heating and cooling.
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through-the-cabinet downflow venting capability.
Factory-configured ready for upflow applications.
Ideal height 35" (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
Approved for Twinning applications with accessory kit (42060E17 through 60100E21 models, only).
Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. (30040E14 through 66120E24 models, only).
Propane convertible with gas conversion accessory kit.
CERTIFICATIONS
All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
Replaces Models - 912SC60120S24, 912SD60120E24, 915SA60120S24, 925SA66120E24


Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Everything included in one price, including the sales tax!

You are seeing our “all-in” prices online, which include the cost of the heating and cooling system, installation parts, labor costs and sales tax. In most circumstances, this installation package covers everything to replace your existing system. Some projects, however, may require work outside of a typical installation, and therefore may incur additional charges. Prior to starting your project, your adviser will discuss any additional required work, if applicable, and why it’s needed. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Your installation is guaranteed to pass inspection or we will fix it for free.

As a part of our professional installation of HVAC systems, we will perform the following:

  • APPLICATION FOR STATE & LOCAL PERMITS: Permit fees are not included, as they vary by municipality.
  • REMOVAL AND DISPOSAL OF YOUR EXISTING SYSTEM: We recycle your old equipment.
  • INSTALLATION OF NEW CONDENSATE DRAIN: Includes up to 10 feet of gravity drain.
  • FABRICATION OF NEW SHEET METAL SUPPLY TRANSITION: Includes up to 12 in. to connect the new system to existing ductwork.
  • OUTDOOR UNIT REPLACEMENT PACKAGE: Includes new outdoor pad, snow legs, weatherproof electrical disconnect and waterproof electrical line whip.
  • NITROGEN LEAK TEST: We will pressure test the existing refrigerant lines. If leak is found a quote to repair or replace will be given.
  • PROFESSIONAL VACUUM TEST: Our installers carry micron gauges and will pull a vacuum below 500 microns on every job.
  • 10 YEAR COMPRESSOR, 10 YEAR PARTS & ONE-YEAR LABOR WARRANTY: Equipment must be registered within 30 days of installation to receive warranty.

Possible additional charges:

Our standard installation package includes everything required for most installations. Should your project require work outside of a standard installation, your adviser will discuss anything that may result in additional charges. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Examples of equipment or labor that could result in additional charges include:

  • Condensate Removal Pump
  • Attic Charges
  • Crane Charges
  • Flue Piping Longer Than 6 ft.
  • Custom Sheet Metal Work
  • Combustion Air Registers
  • Working in finished basements with finished ceilings
  • Converting from standard efficiency to high efficiency

We're trying hard to keep it simple!

Our goal is one price, one trip, one day.

We believe no one should have to come to your home to quote prices for a HVAC systems, parts and standard installation. Sure, we’ll come to your house to take measurements and ensure that we've sized the right system, but we hold the cost of our systems and installations to the prices we show online.

Next Steps

  1. Call us to select your system and to schedule a no-obligation home measurement so that we verify that we’ve sized the right system and to take required measurements.
  2. If gas permits are required by your municipality, we'll collect the nominal fee and process the permits before we begin.
  3. Please ask us about financing if that can help.

We hope we've made this easy. We believe that one simple price — known up front — let's everyone focus on getting this done right.

Warranty

We stand behind the work we perform and the quality of the HVAC systems we install. We guarantee your new HVAC equipment or system will pass inspection or we’ll make the needed adjustments so that it does. Additionally, we provide a 10 Year Parts & Two-Year Labor Warranty on all new heating and cooling systems we install.

Bryant® Legacy™ 95% AFUE 120000 Btuh Single Stage 4-Way Multipoise ECM Condensing Gas Furnace

Bryant® Legacy™ 95% AFUE 120000 Btuh Single Stage 4-Way Multipoise ECM Condensing Gas Furnace


The 915SB Multipoise Condensing Gas Furnace features the single-stage Legacy™ System. The fixed-speed, constant torque (FCT) ECM blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of up to 96.2%, this furnace provides added savings over standard gas furnaces. The Legacy Gas Furnace features 4-way multipoise installation flexibility, and is available in ten model sizes. All sizes except the 26,000 BTUH model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUH model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. A Bryant Legacy Control and Legacy Air Conditioner or Heat Pump, can be used to form a complete Legacy Line System. All sizes are design certified in Canada. Specific sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.


PERFORMANCE
Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
Single-speed inducer motor, and single-stage gas valve
Silicon Nitride Power Heat™ Hot Surface Igniter.
Adjustable blower speed for heating and cooling.
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through-the-cabinet downflow venting capability.
Factory-configured ready for upflow applications.
Ideal height 35" (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
Approved for Twinning applications with accessory kit (42060E17 through 60100E21 models, only).
Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. (30040E14 through 66120E24 models, only).
Propane convertible with gas conversion accessory kit.
CERTIFICATIONS
All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
Replaces Models - 912SC60120S24, 912SD60120E24, 915SA60120S24, 925SA66120E24


Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Everything included in one price, including the sales tax!

You are seeing our “all-in” prices online, which include the cost of the heating and cooling system, installation parts, labor costs and sales tax. In most circumstances, this installation package covers everything to replace your existing system. Some projects, however, may require work outside of a typical installation, and therefore may incur additional charges. Prior to starting your project, your adviser will discuss any additional required work, if applicable, and why it’s needed. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Your installation is guaranteed to pass inspection or we will fix it for free.

As a part of our professional installation of HVAC systems, we will perform the following:

  • APPLICATION FOR STATE & LOCAL PERMITS: Permit fees are not included, as they vary by municipality.
  • REMOVAL AND DISPOSAL OF YOUR EXISTING SYSTEM: We recycle your old equipment.
  • INSTALLATION OF NEW CONDENSATE DRAIN: Includes up to 10 feet of gravity drain.
  • FABRICATION OF NEW SHEET METAL SUPPLY TRANSITION: Includes up to 12 in. to connect the new system to existing ductwork.
  • OUTDOOR UNIT REPLACEMENT PACKAGE: Includes new outdoor pad, snow legs, weatherproof electrical disconnect and waterproof electrical line whip.
  • NITROGEN LEAK TEST: We will pressure test the existing refrigerant lines. If leak is found a quote to repair or replace will be given.
  • PROFESSIONAL VACUUM TEST: Our installers carry micron gauges and will pull a vacuum below 500 microns on every job.
  • 10 YEAR COMPRESSOR, 10 YEAR PARTS & ONE-YEAR LABOR WARRANTY: Equipment must be registered within 30 days of installation to receive warranty.

Possible additional charges:

Our standard installation package includes everything required for most installations. Should your project require work outside of a standard installation, your adviser will discuss anything that may result in additional charges. You will not be under obligation to have any work performed unless you agree to the work quoted and the price you’re given at that time. Examples of equipment or labor that could result in additional charges include:

  • Condensate Removal Pump
  • Attic Charges
  • Crane Charges
  • Flue Piping Longer Than 6 ft.
  • Custom Sheet Metal Work
  • Combustion Air Registers
  • Working in finished basements with finished ceilings
  • Converting from standard efficiency to high efficiency

We're trying hard to keep it simple!

Our goal is one price, one trip, one day.

We believe no one should have to come to your home to quote prices for a HVAC systems, parts and standard installation. Sure, we’ll come to your house to take measurements and ensure that we've sized the right system, but we hold the cost of our systems and installations to the prices we show online.

Next Steps

  1. Call us to select your system and to schedule a no-obligation home measurement so that we verify that we’ve sized the right system and to take required measurements.
  2. If gas permits are required by your municipality, we'll collect the nominal fee and process the permits before we begin.
  3. Please ask us about financing if that can help.

We hope we've made this easy. We believe that one simple price — known up front — let's everyone focus on getting this done right.

Warranty

We stand behind the work we perform and the quality of the HVAC systems we install. We guarantee your new HVAC equipment or system will pass inspection or we’ll make the needed adjustments so that it does. Additionally, we provide a 10 Year Parts & Two-Year Labor Warranty on all new heating and cooling systems we install.

Added to cart!
Special financing available Free shipping when you order over XX You Have Qualified for Free Shipping Spend $x to Unlock Free Shipping You Have Achieved Free Shipping Free Shipping For Over $x to Low interest financing available You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping